Install The Processor - Lenovo ThinkSystem ST250 V2 Maintenance Manual

Notes:
1. Do not touch the gold contacts on the bottom of the processor.
2. Keep the processor socket clean from any object to prevent possible damages.
Figure 107. Opening the processor retainer
After this task is completed
After removing the processor, perform one of the following tasks immediately:
• Install the replacement processor.
1. Install the replacement processor to the system board (see "Install the processor " on page 185).
2. Package the defective processor that was removed, and return it to Lenovo. To prevent any shipping
damage, reuse the packaging of the new processor, and follow all available packaging instructions.
or
• Install the processor that you removed to the replacement system board.
1. Install the removed processor to the replacement system board (see "Install the processor " on page
185).
2. Package the defective system board, and return it to Lenovo. To prevent any shipping damage, reuse
the packaging of the new system board, and follow all available packaging instructions.

Install the processor

Follow instructions in this section to install the processor. This procedure must be executed by a trained
technician.
About this task
To avoid potential danger, read and follow the following safety statements.
• S002
.
Chapter 4 Hardware replacement procedures
185