Dock I/O Board; Removing The Dock I/O Board - Dell Latitude 5430 Rugged Service Manual

Next steps
1. Install the base cover.
2. Install the primary M.2 2280 solid state drive
3. Install the battery.
4. Follow the procedure in

Dock I/O board

Removing the dock I/O board

Prerequisites
1. Follow the procedure in
2. Remove the battery.
3. Remove the primary M.2 2280 solid state drive
4. Remove the base cover.
5. Remove the Wi-Fi I/O
6. Remove the WLAN card.
About this task
The following images indicate the location of the dock I/O board and provide a visual representation of the removal procedure.
50 Removing and installing components
or
after working inside your
before working inside your
or
board.
primary M.2 2230 solid state
computer.
computer.
primary M.2 2230 solid state
drive.
drive.