Dell Latitude 5430 Rugged Service Manual page 122

Hide thumbs Also See for Latitude 5430 Rugged:
Table of Contents

Advertisement

Table 15. System setup options—Display menu (continued)
Display
Full Screen Logo
Limit Panel Brightness to 50%
Table 16. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Onboard Unmanaged NIC
Wireless Device Enable
WWAN/GPS
WWAN Bus Mode
WLAN
Bluetooth
Contactless smartcard/NFC
Enable UEFI Network Stack
Wireless Radio Control
Control WLAN radio
Control WWAN radio
HTTPs Boot Feature
HTTPs Boot
HTTPs Boot Mode
122
BIOS setup
By default, the option is enabled.
Enable or disable full screen logo.
By default, the option is not enabled.
Enable or disable the panel brightness limit to 50%.
By default, the option is not enabled.
This option controls the on-board LAN controller.
By default, the Enabled with PXE option is enabled.
This option controls the on-board USB LAN controller.
By default, the Enabled option is selected.
Enable or disable the internal WWAN/GPS device
By default, the option enabled.
Set the interface type of the Wireless Wan (WWAN) card.
By default, the Bus Mode USB option is enabled.
Enable or disable the internal WLAN device.
By default, the option enabled.
Enable or disable the internal Bluetooth device
By default, the option enabled.
Enable or disable the internal Contactless smartcard/NFC device
By default, the option enabled.
Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Auto Enabled option is selected.
Sense the connection of the system to a wired network and subsequently
disable the selected wireless radios (WLAN).
By default, the option is disabled.
Sense the connection of the system to a wired network and subsequently
disable the selected wireless radios (WWAN).
By default, the option is disabled.
Enable or disable the HTTPs Boot feature.
By default, the Auto Mode option is enabled.
With Auto Mode, the HTTPs Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTPs Boot reads Boot URL from the user-provided data.
By default, the Auto Mode option is enabled.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P148g

Table of Contents