Left I/O Board; Removing The Left I/O Board - Dell Latitude 5430 Rugged Service Manual

Steps
1. Place the LED board and replace the two (M2x3.5) screws that secure the LED board to the system chassis.
2. Connect the LED cable to the connector on the system board.
Adhere the LED flexible printed cable with kapton tapes to the connector.
Next steps
1. Install the base cover.
2. Install the primary M.2 2280 solid state drive
3. Install the battery.
4. Follow the procedure in

Left I/O board

Removing the left I/O board

Prerequisites
1. Follow the procedure in
2. Remove the battery.
3. Remove the primary M.2 2280 solid state drive
4. Remove the base cover.
About this task
The following images indicate the location of the left I/O board and provide a visual representation of the removal procedure.
54 Removing and installing components
or primary M.2 2230 solid state
after working inside your
before working inside your
or
computer.
computer.
primary M.2 2230 solid state
drive.
drive.