WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the battery.
3. Remove the
primary M.2 2280 solid state drive
4. Remove the
base
cover.
5. Remove the
Wi-Fi I/O
About this task
The following images indicate the location of the WLAN card and provide a visual representation of the removal procedure.
Steps
1. Remove the (M2x3.5) screw that secures the WLAN card holder to the system board.
2. Remove the WLAN card holder.
3. Disconnect the antenna cables from the WLAN card.
before working inside your
or
board.
computer.
primary M.2 2230 solid state
drive.
Removing and installing components
45