Touchpad; Removing The Touchpad - Dell Latitude 5430 Rugged Service Manual

Steps
After performing the succeeding steps, you are left with the display back cover.
Next steps
1. Install the display cable.
2. Install the display hinges.
3. Install the camera.
4. Install the display bezel.
5. Install the display assembly.
6. Install the system board.
7. Install the heat-sink (UMA)
8. Install the fan.
9. Install the rear I/O board.
10. Install the dock I/O board.
11. Install the WWAN card.
12. Install the WLAN card.
13. Install the Wi-Fi I/O board.
14. Install the base cover.
15. Install the keyboard.
16. Install the primary M.2 2280 solid state drive
17. Install the battery.
18. Follow the procedure in

Touchpad

Removing the touchpad

Prerequisites
● Follow the procedure in
● Remove the battery.
or heat-sink (discrete).
or primary M.2 2230 solid state
after working inside your
before working inside your
computer.
computer.
drive.
Removing and installing components 109