Power Button With Fingerprint Reader; Removing The Power Button Board With Fingerprint Reader - Dell Latitude 5430 Rugged Service Manual

12. Install the primary M.2 2280 solid state drive
13. Install the battery.
14. Follow the procedure in

Power button with fingerprint reader

Removing the power button board with fingerprint reader

Prerequisites
1. Follow the procedure in
2. Remove the battery.
3. Remove the primary M.2 2280 solid state drive
4. Remove the keyboard.
5. Remove the base cover.
6. Remove the fan.
7. Remove the heat-sink (UMA)
8. Remove the Wi-Fi I/O
9. Remove the WLAN card.
10. Remove the WWAN card.
11. Remove the dock I/O
12. Remove the rear I/O board.
13. Remove the system board.
14. Remove the right Type-C
About this task
The following images indicate the location of the power button board with fingerprint reader and provide a visual representation
of the removal procedure.
86 Removing and installing components
or
after working inside your
before working inside your
or heat-sink (discrete).
board.
board.
daughterboard.
primary M.2 2230 solid state
computer.
computer.
or primary M.2 2230 solid state
drive.
drive.