Exploranium KT-9 User Manual page 76

68
S — scan control from S
TICK
G:\XPLRANUM>scan7
*** SCAN MODE OF KAPPAMETER KT-9 ***
CONNECT KT-9 TO COM1 OF PC-COMPUTER
SWITCH KT-9 ON
SELECT MEASURING MODE 'nP' OR 'Cor'
ERASE ALL DATA FROM MEMORY OF KT-9 - press ENTER on PC
*** KT-9 READY ***
Enter name of file DEV:FILENAME.EXT
File mydata.dat opened for input
Enter HEADER of measurement
PRESS 'C' ON PC TO CLEAR >> C
DISPLAY OF KT-9 MUST BE 'C
PRESS 'R' ON PC TO START SCAN MODE >>
End of 10 sec TIMEOUT
PRESS 'C' ON PC TO CLEAR >>
Figure 22 S program showing a time-out after a free-space
TICK
measurement
k) Place the sensor firmly at the beginning of the core or
profile to be scanned.
l) Press and hold the trigger on the S
ning.
m) If everything is
the display showing:
Start moving the sensor along the core or profile. The
PC display will be showing each reading as it comes in:
TICK
mydata.dat
FIRST Measurement
0'
, the KT-9 should be beeping with
OK
5:000
device
to begin scan-
TICK