Exploranium KT-9 User Manual page 58

50
Error messages
Display
Err 1
err 2
Err 3
Err 4
Err 5
Err 6
Err 7
Err 8
Err 9
Error messages
Meaning
Battery charge is below 5.3V
Internal memory error
Wrong button pushed.
P not depressed long
IN
enough.
Susceptibility is below
-3
–0.99x10
Susceptibility is above
-3
999x10
Mode error:
P used for N
IN
C setting
ORE
Communication error
with external computer
during calibration.
Time-out error:
no data from external
computer
Action
Replace the battery.
If this message persists, the unit
must be returned for repair.
Usually this means the P
been depressed while in the
N -P
O IN
Repeat the measurement.
Take a measurement against a
known sample or calibration
standard to verify that the KT-9
is operating properly.
See above for Err 5
Check that the mode of
-P or operation is properly set.
O IN
1. Check cable and connectors.
2. Contact E
1. Check cable and connectors.
2. Ignore, if no computer used.
IN
mode.
.
XPLORANIUM
has