Exploranium KT-9 User Manual page 41

Taking readings
or
S mode
CAN
1 The display should show either of the
following when in right-handed mode:
r: nP
2 Press the R button to check if the
IGHT
data memory is empty. If the display
does not show C: 0, then you will have
to clear the data memory as described in
"Clearing the memory" on page 37.
3 The display should now show:
C: 0
4 Press the L button, while C: 0 is still
EFT
displayed. The sensor head should be
kept at least 30 cm from any magnetic
sources at this point to ensure a proper
zero or free-air reading.
5 The display changes to the following
and a pulsing audio tone can be heard:
5:000
6 To turn off the S
or L button can be pressed.
R
IGHT EFT
33
r:C x
mode, either the
CAN