Taking Measurements - Exploranium KT-9 User Manual

or

Taking measurements

4 The display changes to the following and a pulsing audio
tone can be heard:
5 To turn off the S
can be pushed.
The mode of operation can only be changed when the data
memory is empty. See "Clearing the memory" on page 37
for details on how to clear the memory.
The KT-9 remembers the last mode of operation that was set.
Therefore, for everyday use when the unit is turned on, it is ready
to go. Depending upon what mode you have selected for opera-
tion, there are slight variations in the procedures to obtain pre-
cise and accurate true susceptibility readings. The various
procedures are described in the following sections. Figure 5
shows the relationships of the various measuring modes.
5:000
mode, either the R
CAN
19
or L button
IGHT EFT