Exploranium KT-9 User Manual page 36

28
Taking measurements
Installing the S
1 Unscrew the P
age compartment of the carrying case.
2 Screw the S
TUD
sensor. You may need a small screwdriver for this
operation.
Selecting core diameter
You will need to specify the core diameter in order to get a cor-
rect reading, as this diameter is critical to the geometric correc-
tion that the KT-9 performs. You will be automatically
presented with the d: (
selected from the A: (
Figure 4 on page 14.
The core diameters are specified in 1 centimetre increments
from 3 to 12 centimetres. A special value of 2.54 is used to
specify a 1 inch diameter core.
To select the core diameter:
1 Press the L
EFT
from the A: menu, i.e.
2 The first choice of the d: (
TUD
from the sensor and place it in the lid stor-
IN
snugly into the hole on the front of the
) menu when the C
DIAMETER
) operating menu. This is shown in
ACCESS
button when the C
A:Cor
DIAMETER
d:2.54
mode is
ORE
mode is displayed
ORE
) menu is displayed, e.g.