Table of Contents
Advertisement
VWR Signature Products________________________________________________________Installation and Start-Up
1.2 Control Panel Keys, Displays and Indicators
(See Figure 1-6)
1. Mode Select Switch - Used to select Run, Settings,
Calibrate and System Configuration Modes.
Mode Select Indicators -
Run: Run Menu
Settings: Set Points Menu
Calibrate: Calibrate Menu
Configuration: Configuration Menu
2. Temperature Display - Displays temperature in degrees
Celsius.
3. Alarm Indicator - Light pulses on/off during an alarm
condition of the cabinet.
Figure 1-5
Battery(s) location and Switch
Figure 1-6, Control Panel
4. Mute - Silences the audible alarm.
5. Low Battery - indicates a low battery condition of the
6. Hot Condenser - indicates a hot condenser condition.
7. Message Center - displays system status and alarms.
8. Scroll for Parameters Arrows - moves the operator
9. Up and Down Arrows - Increases or decreases values,
10. Enter - Stores the value into memory.
1 - 2
•
Battery mounting bracket(s)
•
Battery power switch (freezer and BUS)
•
Freezer battery
•
Optional BUS battery
•
Freezer filter location
freezer battery.
through the choices of the selected mode.
toggles between choices.
Advertisement
Table of Contents
