Control Panel - VWR 1000 Instruction Manual

D.
C P
onTrol anel
The front panel of the Large Capacity Stirrer contains all the controls and
displays needed to operate the unit.
A. Standby button/standby indicator light: The standby indicator light will
illuminate when the unit is plugged in. The unit will be in standby mode.
Press the standby button to activate the speed and time functions. The
standby indicator light will shut off and the speed display and time display
will illuminate. Press the standby button again and the unit will once again
be in standby mode.
B. Speed display: Displays the speed of the stirrer. C. Up/down arrows
for set-point control. On/off button starts/stops stir function. D. The stir
indicator light will be illuminated when the unit is stirring.
B. E.
C. F.
E. time display: Displays accumulated time (continuous mode) or how much
time is remaining (timed mode). F. Up/down arrows for set-point control.
On/off button starts/stops the time function. The display range is from 0
to 9,999 minutes in one (1) second increments. The display will indicate
minutes and seconds until the timer reaches 99 minutes and 59 seconds
(99:59), then the display will automatically display minutes up to 9,999.
A.
EN
4