3� Operation; 3� 1� Control Panel - VWR avantor Micro Star 21 Instruction Manual

3. Operation
3. 1. Control Panel
No� Item
Speed / RCF
➀
Value
Display Mode
➁
Running Time
➂
Temperature
➃
(SNOWFLAKE)
PULSE
➄
OPEN
➅
START
➆
STOP
➇
MINUS / PLUS
➈
TOGGLE
➉
Figure 4: Control Panel Overview
Operation
Description
The speed (rpm) or RCF value (x g) is displayed here. You can modify the value
using the up and down MINUS / PLUS buttons
between rpm and x g using the TOGGLE button
Use the TOGGLE button
sample / chamber temperature, run time counter from start or preset speed on).
The running time is displayed here. You can modify the value using the MINUS /
PLUS buttons .
The temperature is displayed here. You can modify the value using the up and
down MINUS / PLUS buttons
chamber and the empty rotor before the centrifugation run starts using
SNOWFLAKE button.
NOTICE This function is only available on refrigerated centrifuges.
Press PULSE to immediately start the centrifugation run and accelerate up to the
maximal permissible end speed (depending on the used rotor). Releasing PULSE
initiates a stopping process according to the set acceleration and braking curve.
Press OPEN to activate the automatic door release (possible only if device is
powered on and if the rotor is fully stopped).
Press START to start a centrifugation run or to accept the current settings.
Press STOP to manually end the centrifugation run.
Use the up and down MINUS / PLUS buttons
field directly above.
Use the TOGGLE button
vwr.com I Instruction manual VWR Micro Star 21
34 / 87
. below. You can switch
.
to change the display mode. (speed / RCF value,
. You can pre-temper the centrifugation
. to set the parameter in the
to change the display mode.