List Of Diagnostic Events - Endress+Hauser HART Levelflex FMP56 Operating Instructions Manual

Levelflex FMP56, FMP57
Endress+Hauser
à The message for the remedial measures for the diagnostics event opens.
2. Press S + O simultaneously.
à The message about the remedial measures closes.
11.2.3

List of diagnostic events

Sensor element failures
Diagnostic event
Code Description
F003 Broken probe detected
F046 Build-up detected
F083 Memory content
F104 HF cable
F105 HF cable
F106 Sensor
Electronic failures
Diagnostic event
Code Description
F242 Software incompatible
F252 Modules incompatible
F261 Electronic modules
F262 Module connection
F270 Main electronic failure
M270
F271 Main electronic failure
F272 Main electronic failure
M272
F273 Main electronic failure
F275 I/O-Modul failure
F276 I/O-Modul failure
F282 Electronic memory
Maintenance instructions
1. Check map.
2. Check sensor.
Clean sensor.
1. Restart device.
2. Restore S-Dat data.
3. Change sensor.
1. Dry HF cable connection and check sealing.
2. Change HF cable.
1. Tighten HF cable connection.
2. Change HF cable.
1. Check probe isolation.
2. Change sensor.
Maintenance instructions
1. Check software.
2. Flash or change main electronics module.
1. Check electronic modules.
2. Change I/O or main electronic module.
1. Restart device.
2. Check electronic modules.
3. Change IO module or main electronics.
1. Check module connection.
2. Change electronic modules.
Change main electronic module.
1. Restart device.
2. Change main electronic module.
1. Restart device.
2. Contact service.
1. Emergency operation via display.
2. Change main electronics.
Change I/O module.
1. Restart device
2. Change I/O module
1. Restart device.
2. Contact service.
Trouble shooting
Error behavior
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
Error behavior
Alarm
Alarm
Alarm
Alarm
Alarm
Warning
Alarm
Alarm
Alarm
Alarm
Alarm
Alarm
71