Toshiba MA-600 Programming Manual page 92

6. TERMINAL FILE PROGRAMMING
3) Example
To program "NET GT" instead of "NET GT" for Item Code 2 (NET GT) all in double-sized characters.
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
Depress the [2] or [Enter] key.
Depress the [↓] key five times.
Depress the [6] or [Enter] key.
Depress the [↓] key, then depress the
[Enter] key.
(Item code 2 ("NET GT") is selected.)
The [C] key depression clears the
financial item name already
programmed.
Input a desired name.
The [Enter] key depression results in
that the input name is entered and
displayed.
LCD Display
(continued on the next page)
6-72
6.14 Financial Report Item Name Programming
Remarks
The cursor is moved on to "2 NAMES".
"2 NAMES" is selected.
The cursor is moved on to
"6 FINANCIAL ITM NAME".
"6 FINANCIAL ITM NAME" is selected.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
The financial item name already
programmed is displayed.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[Dbl] [N] [E] [T] [→] [G] [T] [Enter]
When the [Enter] key is depressed, the
programmed data is printed.
EO3-11106