Number Of Receipt Print Buffer Line Setting - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.41

Number of Receipt Print Buffer Line Setting

The number of receipt print buffer line is set here. When it reaches the set value, only a receipt print operation
starts. This setting is effective only in REG, MGR, and - modes or programming operation.
CONDITION Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [↓] five times then [Enter].
Depress [↓] seven times then [Enter].
Input the Number of receipt print buffer line
to be set.
NOTE: The Number of receipt print buffer line is set to 50 as default setting after performing a RAM Clear.
3) Example
To set the Number of receipt print buffer line is 30 lines.
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
five times.
Depress the [6] or [Enter] key.
Main Menu
or
Depress [6].
or
Depress [8].
[End]
(continued on the next page)
6-166
6.41 Number of Receipt Print Buffer Line Setting
ECR is being outside a sale and in SET mode.
"6 OTHER" is selected.
"8 RCT PRINT BUFFER" is selected.
Max. 2 digits: 1 to 50
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
LCD Display Remarks
The cursor is moved on to "6 OTHER".
"6 OTHER" is selected.
EO3-11106