Toshiba MA-600 Programming Manual page 139

6. TERMINAL FILE PROGRAMMING
All PLU Deletion:
1) Menu Tree
2) Operation
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
twice.
Depress the [3] or [Enter] key.
Depress the [↓] key.
Depress the [2] or [Enter] key.
Depress the [↓] key four times.
Depress the [5] or [Enter] key.
Depress the [ALL VOID] key.
The [End] key depression allows the
ECR to end this operation.
The programmed PLU data is deleted entirely.
LCD Display
6-119
6.23 PLU Table Programming
Remarks
The cursor is moved on to "3 DP/PLU".
"2 PLU" is selected.
The cursor is moved on to "5 DELETE
(ALL)".
"5 DELETE (ALL)" is selected.
The entire programmed PLU data is deleted,
then the following message is displayed.
A long receipt is issued and the display
returns to Main Menu screen.
EO3-11106