Table of Contents
Advertisement
6. TERMINAL FILE PROGRAMMING
6.33
Hourly Range Table Setting
By setting a maximum of 24 terms per day, sales data control for each term can be performed.
CONDITION
After Hourly Range Reset
OPERATION
Mode Lock: SET
1)
Menu Tree
2)
Operation Flowchart
Depress [↓] four times then [Enter].
Depress [↓] three times then [Enter].
Input a numeric value for TIME01, then
Input a numeric value for TIME24, then
NOTES:
1.
A maximum of 24 terms can be set per day.
2.
To partially or entirely change the hourly range table once set, do the entire setting operation over again.
3.
Do not set a term across 24:00, such as "23:00 to 1:00".
4.
After performing a RAM Clear, the hourly range table is set with hourly terms in the range of 7:00 to 23:00.
Main Menu
or
Depress [5].
or
Depress [4].
Depress [1] or [Enter].
depress [Enter].
depress [Enter].
[End]
ECR is being outside a sale and in SET mode.
"5 BASIC" is selected.
"4 HOURLY RANGE" is selected.
"1 SETTING" is selected.
A 4-digit numeric value is input with the 24 hour time system
(HHMM)
A 4-digit numeric value is input with the 24 hour time system
(HHMM)
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
6-142
EO3-11106
6.33 Hourly Range Table Setting
Hide quick links:
Advertisement
Chapters
Table of Contents
