Toshiba MA-600 Programming Manual page 122

6. TERMINAL FILE PROGRAMMING
Operation
Move the cursor on to a desired status
setting with the [↓] or [↑] key.
Depress the [→] key then the [Enter]
key.
(The status of SINGLE-ITEM DP is
selected.)
Input 12, then depress the [Enter] key.
(VAT/Add-on tax statuses 1 and 2 are
set.)
Input 4000, then depress the [Enter]
key.
(High amount limit €40,00 is set.)
Input 400, then depress the [Enter]
key.
(Low amount limit €4,00 is set.)
Input 10, then depress the [Enter] key.
(Gross Profit Rate 10% is set.)
(continued from the previous page)
LCD Display
(continued on the next page)
6-102
6.19 Department Table Programming
Remarks
The [?] key depression results in that the
following guidance message appears on the
LCD display.
The [→] key depression results in that the
status is changed from N to Y.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
EO3-11106