Department Group Name Programming - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.10

Department Group Name Programming

In this operation, the name of each Department Group is programmed. Which Departments are linked to each
Group has been set in the DEPARTMENT TABLE PROGRAMMING operation. A maximum of 15 department
groups can be set.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [↓] then [Enter].
Depress [↓] then [Enter].
Select a department group of which
name is to be programmed with the [↑]
Input a department group name.
NOTE: A maximum of 12 one-byte characters or 6 two-byte characters can be entered. A combination of both
types is also available.
3) Example
To program the following name on Department Group 1:
Group 1
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
Main Menu
or
Depress [2].
or
Depress [2].
or [↓] key.
[Enter]
[Enter]
[End]
F R
(continued on the next page)
ECR is being outside a sale and in SET mode.
"2 Names" is selected.
"2 DP GROUP NAME" is selected.
The department group name already programmed is displayed.
The ECR enters character input mode.
A maximum of 12 one-byte or 6 two-byte characters are input.
The department group name is entered and printed.
This programming is ended.
display returns to Main Menu screen.
E S
LCD Display
6-61
6.10 Department Group Name Programming
A long receipt is issued and the
H
Remarks
The cursor is moved on to "2 NAMES".
EO3-11106