Footer Message Programming - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.7

Footer Message Programming

A maximum of 64 characters of Footer Message (32 characters x 2 lines) to be printed on the receipt is
programmed here.
Prior to the Footer Message Programming, be sure to select RESET status for Address No. 29, Bit No. 6
of the system option.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [1] or [Enter].
Depress [↓] then [Enter].
*
Input a message in the 1st line.
Input a message in the 2nd line.
NOTES:
1. For each line, a maximum of 32 one-byte characters or 16 two-byte characters can be entered.
A combination of both types is also available.
2. Print format is as shown below.
Main Menu
or
Depress [2].
[Enter]
[Enter]
[Enter]
[Enter]
[End]
(Space)
Cashier Name, Consecutive No., Time
Footer Logo Message
"1 MESSAGES" for various message programming is selected.
"2 FOOTER MESSAGE" is selected.
The message already programmed is displayed.
The ECR enters the 1st line message input mode.
A maximum of 32 one-byte or 16 two-byte characters are input.
The 1st line message is entered and the programmed data is printed.
The ECR enters the 2nd line message input mode.
A maximum of 32 one-byte or 16 two-byte characters are input.
The 2nd line message is entered and the programmed data is printed.
This programming is ended. A long receipt is issued and the display
returns to Main Menu screen.
*: To program a message in a desired line, move the cursor there with
the [↓] key then depress the [Enter] key.
6-52
EO3-11106
6.7 Footer Message Programming