System Option Table - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
ADDRESS NO.
27
BIT
ITEM
NO.
Drawer Close
1
Compulsory
2
Drawer Warning Alarm
Single-drawer or Multi-
3
drawer
4
Multi-drawer Control
Selection of Change at
5
Tendering in Foreign
Currencies
Number of Drawers
6
(if Multi-drawer spec.)
7 -- vacant --
8
-- vacant --
NOTE 1: If SET, the Drawer-close Compulsory option is active. In this case, when the drawer remains open, any operations except [RF], [JF], [C], numeric
input for Sign-ON are prohibited. This rule is applied in REG, MGR, - , and LOCK modes; in the other modes, the drawer may remain open.
NOTE 2: This bit status selection is effective only when Bit No. 1 is SET. If SET (ACTIVE), the setting in the DRAWER WARNING TIME operation will be
effective. In this operation, a time value in seconds can be set for the time length with the drawer open until the warning alarm generated (the initial
value is 15 seconds).
NOTE 3: If SET, the Multi-drawer specification is selected.
In the case of Cashier Code Entry Method (using [LOG] or [LOG/RECEIPT] key), a drawer is to be designated in sale entries, and the number of
drawers will be further selected at Bit No. 6.
In the case of Cashier Key Method, the drawer to be used will be fixed as in the following:
Drawer 1 for Cashier 1, Drawer 2 for Cashier 2 & all others.
NOTE 4: This bit status selection is available regardless of the status selection for the bit No. 3 and the bit No. 4 in this address.
If RESET, change is returned to a customer by the domestic currency in the foreign currency tendering operation.
If SET, change is returned to a customer by the foreign currency, the symbol "
display.
• When change is returned to a customer by the foreign currency, the symbol "
display or the PLU price level display (Bits No. 5 and No. 6 of Address No. 4) has been selected.
• When change is returned to a customer by the foreign currency, the Drawer 2 will open if both the bit No. 3 and the bit No. 4 in this address have
been "SET".

System Option Table

CONTENTS
DRAWER OPTION
SELECTIVE STATUS
RESET NOT COMPULSORY
SET COMPULSORY
RESET NON-ACTIVE
SET ACTIVE
RESET SINGLE DRAWER
SET MULTI DRAWER
RESET BY CASHIER
SET BY CURRENCY
RESET IN DOMESTIC CURRENCY
SET IN FOREIGN CURRENCY
RESET 1 DRAWER
SET 2 DRAWERS
RESET
SET
RESET
SET
6-34
6.5 System Option Programming
Standard Bit Set (auto-set by RAM Clear)
STANDARD
STATUS
NOTE 1 below
*
*
NOTE 2 below
*
NOTE 3 below
*
*
NOTE 4 below
*
*
*
" is displayed in the leftmost 2 digits on the 7-segment Numeric
" will always be displayed even if the option of the cashier No.
EO3-11106
1
REMARKS