Financial Report Item Name Programming - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.14

Financial Report Item Name Programming

Item Names printed on Financial Report are programmed here. Many of them are also printed on sales receipts.
Other Line Item Names will be programmed in 6.15 Print Line Item Name Programming.
CONDITION
OPERATION
1) Menu Tree
2) Operation Flowchart
Depress [↓] then [Enter].
Depress the [↓] key five times then
Select a Financial item name of which
name is to be programmed with the [↑]
Input a Financial item name.
NOTES:
1. As for most items, a maximum of 12 regular-sized or 6 double-sized characters may be programmed for one
item name.
2. As shown in the table on the following pages, the standard program data are pre-programmed (which is
auto-set after a RAM Clear). Therefore, program only the items that need to be changed.
After Financial Reset
Mode Lock: SET
Main Menu
or
Depress [2].
[Enter] key.
or
Depress [6].
or [↓] key.
[Enter]
[Enter]
[End]
ECR is being outside a sale and in SET mode.
"2 NAMES" is selected.
"6 FINANCIAL ITM NAME" is selected.
The financial item name already programmed is displayed.
The ECR enters character input mode.
A maximum of 12 one-byte or 6 two-byte characters are input.
The financial item name is entered and printed.
This programming is ended.
display returns to Main Menu screen.
6-71
6.14 Financial Report Item Name Programming
A long receipt is issued and the
EO3-11106