Department Listing Capacity (Lc) Programming - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.21

Department Listing Capacity (LC) Programming

The High Amount to be Locked Out (HALO) and Low Amount to be Locked Out (LALO) relating to the
department entry are programmed here. Entry of an amount larger than HALO or smaller than LALO can be
prohibited.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [↓] twice then [Enter].
Depress [1] or [Enter] key.
Depress [↓] twice then [Enter].
NOTES:
1. HALO and LALO relating to the department entry are programmed as shown below. (Max. 7 digits)
• Input a HALO value or LALO value relating to the department entry, then depress the [Enter] key.
XXXXXXX [Enter]
(HALO or LALO)
• Amount limit at the department entry: HALO > Department preset price
• Example of HALO programming
To prohibit an entry of an amount larger than 4000, input 4000.
(i.e. The amount equal to or smaller than 3999 can be entered.)
Example of LALO programming
To allow an entry of an amount equal to or larger than 40, input 40.
Main Menu
or
Depress [3].
or
Depress [3].
Input a HALO value.
[Enter]
Input a LALO value.
[Enter]
[End]
6.21 Department Listing Capacity (LC) Programming
ECR is being outside a sale and in SET mode.
"3 DP/PLU" for Department/PLU table programming is selected.
"1 DP" is selected.
"3 DIGIT LIMIT(PRICE)" is selected.
Max. 7 digits (0 to 9999999)
Max. 7 digits (0 to 9999999)
HALO and LALO are entered and printed.
This programming is ended.
display returns to Main Menu screen.
6-106
A long receipt is issued and the
≧ LALO
EO3-11106