Commercial Message Programming - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.6

Commercial Message Programming

A maximum of 96 characters of Commercial Message (32 characters x 3 lines) to be printed on the receipt is
programmed here.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [1] or [Enter].
Depress [1] or [Enter].
*
Input a message in the 1st line.
Input a message in the 2nd line.
Input a message in the 3rd line.
NOTES:
1. For each line, a maximum of 32 one-byte characters or 16 two-byte characters can be entered.
A combination of both types is also available.
2. If three blank lines are programmed for a commercial message, their portions on the receipt will be closed.
If at least one line message is programmed, the other two lines will be blank.
Main Menu
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[End]
"1 MESSAGES" for various message programming is selected.
"1 COMMERCIAL MESSAGE" is selected.
The message already programmed is displayed.
The ECR enters the 1st line message input mode.
A maximum of 32 one-byte or 16 two-byte characters are input.
The 1st line message is entered and the programmed data is printed.
The ECR enters the 2nd line message input mode.
A maximum of 32 one-byte or 16 two-byte characters are input.
The 2nd line message is entered and the programmed data is printed.
The ECR enters the 3rd line message input mode
A maximum of 32 one-byte or 16 two-byte characters are input.
The 3rd line message is entered and the programmed data is printed.
This programming is ended. A long receipt is issued and the display
returns to Main Menu screen.
*: To program a message in a desired line, move the cursor there with
↓
the [ ] key then depress the [Enter] key.
6-49
6.6 Commercial Message Programming
EO3-11106