Editing The Playback End Point - Tascam HS-4000 Owner's Manual

9 – Playlist mode

Editing the playback end point

1. Press the HOME key on the front panel to open the
Home screen.
2. Touch a file name or title name button display and then
touch the A D J U S T E N T R Y button in the pull-down menu to
open the A D J U S T E N T R Y X X X
number.)
NOTE
You can also open this screen by touching the
touching the button in the pull-up menu when a take is selected on
A D J U S T
the ENTRY list screen or one of the key assign buttons on the left is selected on
the ASSIGN file screen.
Entry List Screen
Assign File Screen
3. The
E n d P o i n t value shown for the
item is the playback end point for the selected entry.
Press the E D I T button for the
E D I T E N D P O I N T screen where you can change the
playback end point.
66
TASCAM HS-4000
screen. (" X X X " is the entry
button and then
M E N U
S t a r t E n d P o i n t
E n d P o i n t to open the
Use the F R A M E E D I T button on the
screen to set whether or not you will edit the frame value.
4. Use the number buttons to input the playback end
point for the entry.
・ If you begin input without selecting a digit, input will start
from the smallest one.
・ To input a specific digit, touch it to make its background
yellow, and then use the number buttons or the DATA
dial to enter two digits at a time.
・ Touch the
C U R R E N T ▼
playback position to the input value. Touch the
button to set the input value to the end of the take.
・ Touch the
C L E A R button to erase all entered values.
・ Touch the
M a r k L i s t
screen where you can copy the time from a designated
mark.
On this screen, press the e button of a mark to copy its
time to the playback end point and return to the
E N T R Y X X X screen.
NOTE
If the entry that you are trying to edit is currently playing, when you touch the
e
button, a " C a n n o t c h a n g e n o w . C u r r e n t l y P l a y i n g
appears, and you will not be able to change the playback end point. Stop
e
playback before touching the button.
5. Touch the
E N T E R button to confirm the setting.
NOTE
If the entry that you are trying to edit is currently playing, when you touch the
E n t e r button, a " C a n n o t c h a n g e n o w . C u r r e n t l y P l a y i n g
appears, and you will not be able to change the playback end point. Stop
playback before touching the E n t e r button.
TIP
・ You can also use the PLAY key and other transport keys while listening
to the audio to find the location, and then press the
button to input that value here.
・ This can also be edited using an externally connected keyboard.
・ Press the keyboard's ESC key to clear all the values.
E D I T E N D P O I N T
button to copy the current
S E T M A X
button to open the mark list
A D J U S T
" message
" message
▼
C U R R E N T