System Settings (System Setup); Preferences Page; Analog Ref. Level Adjust Page; Clock Adjust Page - Tascam HS-4000 Owner's Manual

10 – Internal settings

System settings (SYSTEM SETUP)

Make system settings on this screen.
The S Y S T E M S E T U P screen has 3 pages:
A N A L O G R e f . L E V E L A D J U S T
Touch the tabs at the bottom of the screen to open the
corresponding page.

PREFERENCES page

Set system preferences on this page.
KBD Type
Set the connected keyboard type to either
English-language keyboards or J P N
Setting buttons: U S , J P N (default)
ONLINE Function
Set whether or not to enable the online function (default:
S w i t c h a b l e ).
Set to "Switchable" to allow online playback mode to be enabled
from the parallel connector, serial connector (RS-232C) or a
TASCAM RC-HS32PD remote controller (sold separately).
Set to A l w a y s O N to not allow online playback to be used and
always output the sound from all connectors. For details, see
"Online functions" on page 89.
Digital Ref. Level
Set the reference level for digital inputs and outputs to a number
of decibels below the maximum level (full scale).
Setting buttons: – 9 d B , – 1 4 d B , – 1 6 d B
Analog Input Ref. Lvl
Set the reference level for analog inputs.
The options differ according to the
s etting.
Digital Ref. Level setting
− 9 d B
− 9 d B
Not
Analog Output Ref. Lvl
Set the reference level for analog outputs.
The options differ according to the
s etting.
Digital Ref. Level setting
− 9 d B
− 9 d B
Not
NOTE
Sound input through the analog audio inputs according to the analog input
reference level becomes sound in the digital domain according to the digital
reference level.
The analog audio outputs output digital sound according to the digital
reference level as analog sound according to the analog output reference
l evel.
80
TASCAM HS-4000
P R E F E R E N C E S ,
and C L O C K A D J U S T .
U S for
for Japanese keyboards.
, – 1 8 d B , – 2 0 d B (default)
D i g i t a l R e f . L e v e l
Analog Input Ref. Lvl
Fixed at + 6 d B
+ 4 d B or – 2 0 d B
D i g i t a l R e f . L e v e l
Analog Output Ref. Lvl
Fixed at + 6 d B
+ 4 d B or – 2 0 d B

ANALOG Ref. LEVEL ADJUST page

You can make fine adjustments to the analog input and output
reference levels independently for each channel.
Use an I N X knob to adjust the analog input level of the
corresponding channel, and use an
analog output level of the corresponding channel. ("
channel number.)
Touch a knob to select it, highlighting its area in yellow, and use
the DATA dial to adjust the level.
Turn the dial to adjust it in 0.1-dB intervals, and press and turn
the dial to adjust it in 1-dB intervals. The value is shown beneath
each knob.
Setting range: –6dB to +6dB (default: 0dB)
If an analog input for a channel is not set, the corresponding
knob will not be shown and "Analog INX not selected" will
appear in the menu area.
CH4 has no analog input

CLOCK ADJUST page

Set the time of the built-in clock.
Touch the item that you want to set, and use the DATA dial to
adjust the item. (See "Setting the time of the built-in clock" on
page 23.)
Touch the S E T button on the C L O C K A D J U S T
DATA dial to confirm the setting.
NOTE
While setting the time, the clock stops and the ":" does not blink. When you
touch the SET button, the clock starts again and the ":" blinks.
O U T X knob to adjust the
X " is the
page or press the