Setting The Editing Start (In) Point; Setting The Editing End (Out) Point; Clearing The Start And End (Out) Points - Tascam HS-2000 Owner's Manual

Setting the editing start (IN) point

1. Press the HOME key on the front panel to open the
Home Screen.
2. Touch the
EDIT MODE
mode.
3. Use the m/, keys (or other controls) to locate the
timeline cursor to the position (time) where you want
editing to start.
4. Touch the
SET/SELECT
menu.
5. Touch the button in the pull-up menu to set
SET IN
the editing start (IN) point.
The IN mark ( ) will appear in the mark display area at
the current position.
button to enter the edit
button to open a pull-up
7 – Timeline mode

Setting the editing end (OUT) point

6. Use the m/, keys (or other controls) to locate the
timeline cursor to the position (time) where you want
editing to end.
7. Touch the
SET/SELECT
menu.
8. Touch the button in the pull-up menu to
SET OUT
set the editing end (OUT) point.
The OUT mark ( ) will appear in the mark display area
at the current position.
The interval shown in light blue between the IN (
) and OUT ( ) marks will be affected by editing
operations.

Clearing the start and end (OUT) points

1. Touch the
SET/SELECT
menu.
2. Touch the button in the pull-up menu. When
CLEAR
a confirmation pop-up appears, touch the
or press the DATA dial.
The current IN and OUT points are removed, and the
IN ( ) and OUT ( ) marks disappear
button to open a pull-up
button to open a pull-up
button
OK
59
TASCAM HS-2000