Lock Function - Tascam HS-4000 Owner's Manual

3 – Preparation

Lock function

Press the MENU key while pressing and holding the HOME key
on the front panel to open the L O C K S E T U P
can disable or enable operation from the front panel and
external devices.
The front panel is divided into two sections, which can be locked
and unlocked separately.
Types of external devices are also divided into two categories,
which can be locked and unlocked separately.
If you press the button for a section, it changes from
L O C K (with a yellow background) and the locked area appears
dimmed.
Everything locked
24
TASCAM HS-4000
 When the
 If the display is touched, the following pop-up message
screen where you
 If one of the keys around the display is pressed, the
 When
keys is pressed, the following pop-up message appears
when the transport is locked.
U N L O C K to
 When
control or keyboard connected to a remote connector is
used, the following pop-up message appears when
remote/keyboard control is locked.
 When
is conducted using RS–232C, RS–422, PARALLEL or
ETHERNET, the following pop-up message appears when
external input is locked.
L C D S e c t i o n is set to L O C K
appears when the display (panel) is locked.
following pop-up message appears when the display
(keys) is locked.
T r a n s p o r t is set to L O C K , if one of the transport
R E M O T E / K E Y B O A R D is set to
E X T E R N A L C O N T R O L is set to
:
L O C K , if a remote
L O C K , if an operation