Changing A Playlist Name Later; Loading Playlists - Tascam HS-4000 Owner's Manual

9 – Playlist mode

Changing a playlist name later

You can change playlist names later.
1. Press the PROJECT key on the front panel to open the
P R O J E C T screen.
2. Touch the e button for the project that contains the
playlist for which you want to change the name to
open the session selection screen.
If it is not the current project, a pop-up window appears
confirming that you want to load it. Touch the
button.
3. Touch the e button for the session that contains the
playlist for which you want to change the name to
open the playlist selection screen.
If it is not the current session, a pop-up window appears
confirming that you want to load it. Touch the
button.
4. Select the playlist that you want to change. The
background of the selected playlist name appears
yellow.
5. Touch the
M E N U button to open a pull-up menu.
6. Touch the
E D I T N A M E button in the pull-up menu to
open the P L A Y L I S T N A M E
NOTE
The E D I T N A M E button in the pull-up menu cannot be selected if the loaded
playlist is selected, if multiple playlists are selected or if the selected playlist is
not visible (scrolled off screen).
7. Input the playlist name. Follow the procedures in
"Editing the project name" on page 35.
8. Touch the
E n t e r button on the
screen or press the DATA dial to confirm the playlist
name and return to the playlist selection screen.

Loading playlists

1. Press the PROJECT key on the front panel to open the
screen.
P R O J E C T
2. Touch the e button for the project that contains the
playlist you want to load to open the session
selection screen.
If it is not the current project, a pop-up window appears
confirming that you want to load it. Touch the
button.
3. Touch the e button for the session that contains the
playlist you want to load to open the playlist
selection screen.
If it is not the current session, a pop-up window appears
58
TASCAM HS-4000
O K
O K
screen.
P L A Y L I S T N A M E
O K
confirming that you want to load it. Touch the
button.
4. Select the playlist that you want to load.
5. Touch the
M E N U button on the Playlist selection
screen to open a pull-up menu.
Single mode
Dual mode
6. In single mode, touch the
menu. When in dual mode, press the
L O A D t o B button to load it to the desired player.
7. When a confirmation message pop-up appears, touch
the OK button or press the DATA dial.
Single mode
Dual mode
After loading completes, the Home Screen opens.
NOTE
On the playlist selection screen, instead of touching the
followed by the button (or
L O A D L O A D t o A / B
item, you can also press the e button for the playlist that you want to play
back to load it.
When in single mode, the same pop-up message as above appears. Touch
the O K button or press the DATA dial.
When in dual mode, the pop-up window has
buttons. Touch the one for the desired player.
O K
L O A D button in the pull-up
L O A D t o A or
M E N U button
button) in the pull-up menu
L O A D t o A and L O A D t o B