Tascam HS-4000 Owner's Manual
  1. Manuals
  2. Brands
  3. Tascam Manuals
  4. Recording Equipment
  5. HS-4000
  6. Owner's manual
Tascam HS-4000 Owner's Manual

Tascam HS-4000 Owner's Manual

4 channel audio recorder
Hide thumbs Also See for HS-4000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
D01134020A
HS-4000
4 Channel Audio Recorder
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HS-4000 and is the answer not in the manual?

Questions and answers

Related Manuals for Tascam HS-4000

Summary of Contents for Tascam HS-4000

  • Page 1 D01134020A HS-4000 4 Channel Audio Recorder OWNER'S MANUAL...

  • Page 2: Important Safety Instructions

    This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TASCAM HS-4000 For European Customers ª Disposal of electrical and electronic equipment (a) All electrical and electronic equipment should be...
  • Page 3 19-inch rack, as shown below. Remove the feet of the unit before mounting. CAUTION Leave 1U of space above the unit for ventilation. • Allow at least 10 cm (4 in) at the rear of the unit for • ventilation. TASCAM HS-4000...
  • Page 4 4 cm inside the front of the rack. Remove the three screws that attach the rack mount ears from each side and then use the screws to reattach the ears as shown in the illustration below. TASCAM HS-4000...

  • Page 5: Table Of Contents

    Playback in timeline mode...45 Project/session selection...45 Setting input monitoring...45 Setting the online function ...45 Locate to the playback start position ...45 Playback control in timeline mode...45 Using the call function ...45 BWF–J cue point...45 Importing and exporting AES31 editing information TASCAM HS-4000 Contents...
  • Page 6 Edit the playback starting time...64 Editing the playback starting point...65 Editing the playback end point...66 Saving a playlist ...67 Creating a JPPA PPL file from the loaded playlist ...68 TASCAM HS-4000 Playback ...69 Project/session/playlist selection...69 Selecting the current player...70 Setting the online function ...70 Playback control in playlist mode...70...
  • Page 7 17 – Specifications... 103 General ...103 Inputs and outputs...103 Analog audio inputs and outputs ... 103 Digital audio inputs and outputs ... 104 Control inputs and outputs... 104 Audio performance ...104 Other specifications ...105 Dimensional drawings ...106 Block diagram...107 Contents TASCAM HS-4000...

  • Page 8: Introduction

    1 − Introduction Thank you very much for purchasing a TASCAM HS-4000 4 Channel Audio Recorder. Please read this manual thoroughly before using the unit so that you understand correct operating procedures and can use its functions fully. We hope that you enjoy using this unit for many years.

  • Page 9: Intellectual Property Rights

    CF cards that are available commercially is possible. Microdrives cannot be used with this unit. The capacities and performance of your HS-4000 will vary based on the speed and abilities of the Compact Flash (CF) media used. Older and some cheaper Compact Flash (CF) cards use slower memory components and little internal buffering which results in poor recording performance.

  • Page 10: Names And Functions Of Parts

    SLOT 1 and SLOT 2 indicators. Push and turn the DATA dial while pressing and holding the HOME key to adjust the brightness of only the color display. TASCAM HS-4000 ○ 6 MENU key Press to open the MENU screen.
  • Page 11 If you return to the original position when in shuttle operation mode, the transport status is restored to how it was before shuttle playback was begun. TASCAM HS-4000 ] keys (search) ] key while pressing...

  • Page 12: Rear Panel

    B outputs from connector 2. TASCAM HS-4000 ○ 3 4 REMOTE connectors Connect a TASCAM RC-HS32PD remote control (sold separately) here. CAUTION This is not an Ethernet connector (LAN, etc.). Never connect this to a network using an Ethernet cable. Doing so could damage this unit or equipment in the network.
  • Page 13 ○ 4 2 GROUND terminal When using a TASCAM RC-HS32PD remote control (sold separately), depending on the operating environment, the color display might flicker or noise might be heard when monitoring. If this occurs, use the GROUND terminal.

  • Page 14: Parallel Connector

    NOTE ・ RS–232C connector functions will be supported in a future firmware version update. ・ Please contact TASCAM customer support for information about this unit’s RS–232C command protocol. RS–422 connector You can control this unit remotely by connecting the RS–422 connector on its rear panel to a controller or editor compatible with SONY P2 protocol (RS–422).

  • Page 15: Home Screen

    Master clock. S Y N C T / C screen. (See “Sync P L A Y S E T U P screen. S T A R T T I M E screen where you can set the TASCAM HS-4000...
  • Page 16 (1-2 or 3-4) for monitoring (solo function). The level meters and track numbers for the soloed channels appear highlighted in yellow. The level meters for the TASCAM HS-4000 channels that are not soloed appear shaded. Touch the same channel pair again to stop soloing them.
  • Page 17 U s e r (default). button to open the screen where you can button to open the screen where you can – - - - ” appears and the value setting is saved with each project. If you change TASCAM HS-4000...

  • Page 18: In Take Mode Or Single Playlist Mode

    ○ 2 6 Time bar This shows the current playback position. What is shown depends on the time display mode. TASCAM HS-4000 Mode The current playback position relative to the length of the take or entry is shown.

  • Page 19: In Dual Playlist Mode

    The time code time of the playing entry is shown. P L A Y S E T U P screen. When the online playback mode is , the icon appears. When online playback mode is O F F , the icon appears with green letters. TASCAM HS-4000...
  • Page 20 68.) ○ Level meters (button) The playback level is shown. TASCAM HS-4000 Touch this area to enable monitoring of a playlist. When selected for monitoring, the area around the meters appears yellow. When an input overloads, the corresponding red.

  • Page 21: Preparation

    3. Press the square button in again to partially eject the CF card. 4. Pull the CF card out by hand. Security screws The included security screws can be used to lock the CF card slot covers. Use a Phillips head screwdriver to install or remove the screws. TASCAM HS-4000...

  • Page 22: About The Display

    Push and turn the DATA dial while pressing and holding the HOME key to adjust only the brightness of the color display. TASCAM HS-4000 Cautions related to display use  The display can easily be scratched, so do not use pointed objects, including fingernail tips, to touch it.

  • Page 23: Turning The Power On And Off

    NOTE After purchasing this unit, set the clock before making your first recording. If you do not set the clock, the time stamps on recording files will not be correct. TASCAM HS-4000 S Y S T E M...

  • Page 24: Lock Function

    L O C K (with a yellow background) and the locked area appears dimmed. Everything locked TASCAM HS-4000  When the L C D S e c t i o n  If the display is touched, the following pop-up message appears when the display (panel) is locked.

  • Page 25: Recording Times

    CF card in use.  The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the CF card. 32 GB 25:12 23:08 16:48 15:26 8:24 7:42 3 – Preparation TASCAM HS-4000...

  • Page 26: Basic Operation

    Touch this button to return to the previous screen. NOTE You can also return to the previous screen by pressing the EXIT/CANCEL (PEAK CLEAR) key. TASCAM HS-4000 CF card preparation CF card selection 1. Press the MENU key on the front panel to open the...

  • Page 27: Formatting A Cf Card

    F O R M A T item, a new project will M E N U C F M A N A G E button on the M E N U screen. 粗利 button next to the TASCAM HS-4000...

  • Page 28: Creating A New Project

    Touch the N E X T button again to open the third page where TASCAM HS-4000 you can set the starting time and number of tracks in timeline mode, for example. For details about each item, see “Creating new projects” on page 34.

  • Page 29: Setting Inputs And Outputs

    S Y S T E M page, set the digital reference level, A N A L O G R e f . L E V E L A D J U S T page, you can make TASCAM HS-4000...

  • Page 30: Connecting Headphones

    ONLINE switch.) The ONLINE switch lights when ON. You can also connect a TASCAM RC–HS32PD remote controller (sold separately), for example, and use its master fader to adjust the level suitably. When the master fader is lowered completely, sound is not output from the output connectors.

  • Page 31: Projects

    Polyphonic and SubFolder modes, but in Session Root mode, you might have to wait more than 4 seconds. NOTE ・ The default setting is S u b F o l d e r ・ Monophonic mode is planned for a future firmware version upgrade. TASCAM HS-4000...

  • Page 32: Project Screen

    CF card.  CREATE PROJECT button Touch to open the C R E A T E P R O J E C T TASCAM HS-4000  MULTI SELECT button Touch to enable the selection of multiple projects.  MENU button...

  • Page 33: Aes31 File Selection Screen

    The playlist selection screen is only shown when the operation mode is playlist mode.  Session name display This shows the current session name Touch this area to show the session selection screen. TASCAM HS-4000 5 – Projects L O A D...

  • Page 34: Project Operations

    On the 1 s t S E S S I O N screen, the maximum number of TASCAM HS-4000 characters allowed is indicated by a yellow background. ■ Fs Set that sampling frequency of the project. 48k–0.1% sampling frequency is pull-down compatible, and 48k+0.1% is pull-up compatible.

  • Page 35: Editing The Project Name

    E D I T N A M E button in the pull-up P R O J E C T N A M E screen screen. button on the C R E A T E P R O J E C T screen, as shown below. TASCAM HS-4000...

  • Page 36: Rebuilding Projects

    Multiple projects selected 4. Touch the R E B U I L D button in the pull-up menu. TASCAM HS-4000 5. Touch the button or press the DATA dial when a confirmation pop-up message appears. During rebuilding, a progress status pop-up appears. When rebuilding completes, the pop-up disappears.

  • Page 37: Session Operations

    NOTE The letter “C” appears in the icon to the left of the name of the current session. TASCAM HS-4000 5 – Projects icon to the left of the name of the screen to S E S S I O N...

  • Page 38: Rebuilding Sessions

    When rebuilding completes, the pop-up disappears. NOTE You can also rebuild a session from that session’s take selection screen. TASCAM HS-4000 Copying sessions You can copy session folders between CF 1 and CF 2 (two CF cards are necessary). When you copy a session, the same directory structure is created at the copy destination.

  • Page 39: Erasing Sessions

    Project selection screen Session selection screen When Timeline mode AES31 file selection screen When Take mode Take selection screen When Playlist mode Playlist selection screen TASCAM HS-4000 5 – Projects...

  • Page 40: Overview Of Operation Modes

    Auto cue, auto ready and incremental play functions are available.  Using a TASCAM RC–HS32PD or other remote controller, flash start playback is possible (three pages of 32 keys each).  Different types of marks, including BWF–J CUE points, can be set, managed, edited and used for playback.

  • Page 41: Selecting The Operation Mode

    The button for the selected mode appears yellow. TIME LINE MODE TAKE MODE PLAYLIST MODE (SINGLE) PLAYLIST MODE (DUAL) 4. Press the S E T button to enable the selected mode and return to the Home Screen. 6 – Overview of operation modes TASCAM HS-4000...

  • Page 42: Timeline Mode

     You can also touch the C R E A T E P R O J E C T button on screens 1/3 and 2/3 to create a project. TASCAM HS-4000 4. Touch the message appears. When creation of the project completes, the Home Screen reopens.

  • Page 43: Arming Tracks For Recording

    R E C S E T U P 7 – Timeline mode page, you can turn confidence tab on the R E C S E T U P screen to open R E C S E T U P screen to open the TASCAM HS-4000...

  • Page 44: Making A Recording

    ・ When in recording standby, the parallel control signals output are high for TALLY_RECORD and low for TALLY_PAUSE. When in recording standby, the REC and PAUSE keys on the front panel will be lit. TASCAM HS-4000 Stopping recording To stop recording, press the STOP (RETAKE) key. Retaking a recording Press the STOP (RETAKE) key while pressing and holding the SHIFT key to erase the last recorded region.

  • Page 45: Playback In Timeline Mode

    (BC$STANDBY CUE point) exists, that CUE will be followed. BC$PAUSE During playback, when this point is reached, a BC$PAUSE tally is output, and playback pauses. TASCAM HS-4000 ] keys, jump to a mark or ] key to search ] key while...

  • Page 46: Importing Aes31 Editing Information

    S a v e button to save the session to the CF card. TASCAM HS-4000 Exporting AES31 editing information You can export the currently loaded session to an AES31 file. The exported file is created in the current session.

  • Page 47: Editing Regions

    E r a s e button in ▼ button, and touch the D i v i d e button button, and touch the U N D O button in U N D O button is disabled. The TASCAM HS-4000...

  • Page 48: Redoing An Edit (Redo)

    B O U N C E N A M E screen where you can input the bounce file name. TASCAM HS-4000 R E D O button in Input the file name. Follow the procedures in “Editing the project name” on page 35.

  • Page 49: Take Mode

    C R E A T E P R O J E C T age 37. 8 – Take mode button to open the M A K E button to open the screen where you can change the button or press the DATA dial to screen. button. TASCAM HS-4000...

  • Page 50: Arming Tracks For Recording

    2. Press the R E C S E T U P button to open the screen. TASCAM HS-4000 On the R E C M O D E monitoring on or off. For details, see “Confidence monitoring” on page 88.

  • Page 51: Making A Recording

    For details about the P A U S E M O D E item see the FILE FORMAT page on page 71. TASCAM HS-4000 item is set to N O S P L I T...

  • Page 52: Playback

    5. Touch the M E N U button in the take selection screen to open the pull-up menu. TASCAM HS-4000 6. Touch the L O A D button in the pull-up menu. 7. When a confirmation message appears in the pop-up window, touch the When loading completes, the Home Screen opens.

  • Page 53: Using The Call Function

    BC$PAUSE tally is output, and playback pauses. Using the flash start function in take mode Using a TASCAM RC–HS32PD (sold separately) or other remote controller, flash start playback is possible. For details, see “Flash start function” on page 90.

  • Page 54: Take Operations

    Frame edit on Frame edit off TASCAM HS-4000 8. Use the number buttons to input the take start time. ・ If you begin input without selecting a digit, input will start from the smallest one.

  • Page 55: Using @ With Take Names

    NOTE This function is not available in versions 1.00–1.05. It is available with a version upgrade. Use this function to add “@” to good takes, for example. CAUTION Take names cannot be edited. 8 – Take mode TASCAM HS-4000...

  • Page 56: Playlist Mode

    6. Touch the button or press the DATA dial when a confirmation pop-up message appears. TASCAM HS-4000 NOTE If you touch a e button to load a session, this pop-up window will not open. When loading a session completes, the last loaded playlist is automatically loaded (or a default playlist is created for a new session) and the Home Screen reopens.

  • Page 57: Creating A Playlist From A Jppa Ppl File

    ・ After a playlist is created it becomes the currently loaded playlist. CAUTION When a JPPA PPL format file is loaded, playlists are created for both player A and player B. 9 – Playlist mode button to open a pull-up button in the pull-up menu to screen. TASCAM HS-4000...

  • Page 58: Changing A Playlist Name Later

    If it is not the current session, a pop-up window appears TASCAM HS-4000 confirming that you want to load it. Touch the button. 4. Select the playlist that you want to load.

  • Page 59: Sorting Contents In A Playlist

    7. Touch the button or press the DATA dial when a confirmation pop-up message appears. During erasing, a progress status pop-up appears. When erasing completes, the pop-up disappears. NOTE You cannot delete the currently loaded playlist. TASCAM HS-4000 9 – Playlist mode...

  • Page 60: Editing A Playlist (Adding, Clearing And Editing Entries)

    Entry is a format that cannot be played back No entry ○ 6 INFO button When an entry is selected, press this button to open an TASCAM HS-4000 information pop-up for that entry. When an entry is not selected, pre information about the current playlist. ○...

  • Page 61: Assigning A Take To An Entry

    9 – Playlist mode Single mode Dual mode A S S I G N F I L E button to Single mode Dual mode button on the Entry List screen to open the A S S I G N TASCAM HS-4000...

  • Page 62: Entry Number Page Allocation

    Note: “―” means there is no corresponding page. “A:” indicates entry numbers for the Player A playlist, and “B:” for the Player B playlist. TASCAM HS-4000 R C – H S 3 2 P D F l a s h .

  • Page 63: Clearing Entry Assignments

    C a n n o t c h a n g e n o w . C u r r e n t l y P l a y i n g appears, and you will not be able to edit the title. Stop playback before touching the E n t e r button. TASCAM HS-4000 9 – Playlist mode screen. (“ X X X ” is the entry...

  • Page 64: Edit The Playback Starting Time

    ENTRY list screen or one of the key assign buttons on the left is selected on the ASSIGN file screen. Entry List Screen Assign File Screen TASCAM HS-4000 3. The value shown next to the playback starting time for the selected entry. Press E D I T...

  • Page 65: Editing The Playback Starting Point

    ” message button. button to confirm the setting. ” message E n t e r button. ▼ C U R R E N T TASCAM HS-4000...

  • Page 66: Editing The Playback End Point

    E D I T E N D P O I N T screen where you can change the playback end point. TASCAM HS-4000 Use the F R A M E E D I T screen to set whether or not you will edit the frame value.

  • Page 67: Saving A Playlist

    P L A Y L I S T N A M E screen M E N U button on the S A V E S A V E A S ( A ) S A V E A S ( B ) Single Mode Dual Mode TASCAM HS-4000...

  • Page 68: Creating A Jppa Ppl File From The Loaded Playlist

    ENTRY list or ASSIGN file screen to open a pull-up menu, and touch the E X P O R T P P L create a JPPA PPL file. TASCAM HS-4000 4. Touch the E n t e r press the DATA dial.

  • Page 69: Playback

    When in single mode, the same pop-up message as above appears. Touch button or press the DATA dial. When in dual mode, the pop-up window has buttons. Touch the one for the desired player. TASCAM HS-4000 9 – Playlist mode button in the pull-up L O A D t o B...

  • Page 70: Selecting The Current Player

    BC$FILE BC$PAUSE Using the flash start function in playlist mode Using a TASCAM RC–HS32PD (sold separately) or other remote controller, flash start playback is possible. For details, see “Flash start function” on page 90. ] key to search ] key or , [...

  • Page 71: 10 - Internal Settings

    Sub Folder button (default): Audio files are saved in subfolders created for each take within the session folder. Session Root button: Audio files are saved directly in the session folder. TASCAM HS-4000 R E C M O D E...

  • Page 72: Options Page

    Setting buttons: S P L I T (default), N O S P L I T TASCAM HS-4000 OPTIONS page Make settings related to the pre–recording and auto markers. PreREC Time When P r e R E C T i m e...

  • Page 73: Playback Settings (Play Setup)

    The PLAY key on the front panel of the unit, the PLAY key, flash start keys and fader start function of the TASCAM RC-HS32PD remote control (sold separately), and play and flash start commands from external controllers (RS-422, RS-232C, parallel, keyboard).

  • Page 74: Sync Page

    Depending on the combination of Project sampling frequency and Play Fs settings, the unit will operate with the sampling frequency shown below (default: O F F TASCAM HS-4000 Project sampling frequency 48 kHz 48 kHz 48 kHz 48 kHz - 0.1% Not possible...

  • Page 75: T/C Page

    3 0 D F button, the S T A R T T I M E 10 – Internal settings to this mode 2 4 F 2 5 F 2 9 . 9 7 D F (default), 3 0 N D TASCAM HS-4000...

  • Page 76: I/O Page

    TASCAM HS-4000 entry that is lined up will start playback standby. RC–HS32PD Flash Start Key Mode This sets the number of flash start keys for a TASCAM RC–HS32PD remote controller (sold separately) in dual playlist mode. 16x2 keys button: 16 keys can be used by both A and B for a total of 32 keys.

  • Page 77: Rs-232C Page

    3 8 4 0 0 (default) (default): Time code frame edges synchronized with video signal frame edges O F F Independent from video frame clock 10 – Internal settings R S – 4 2 2 (default) TASCAM HS-4000...

  • Page 78: Mixer Settings (Mixer Setup)

    Make monitoring mixer settings on this page. This page differs in single player and dual player modes. Single player mode Dual player mode TASCAM HS-4000 METER buttons Use these buttons to set whether the meter shows the position before or after the online fader.

  • Page 79: Setup Page

    O F F (default), – 0 . 1 7 d B – 0 . 1 3 d B – 0 . 1 0 d B (default) and i n f (hold forever). (default) and F a s t TASCAM HS-4000...

  • Page 80: System Settings (System Setup)

    S w i t c h a b l e Set to “Switchable” to allow online playback mode to be enabled from the parallel connector, serial connector (RS-232C) or a TASCAM RC-HS32PD remote controller (sold separately). Set to A l w a y s O N to not allow online playback to be used and always output the sound from all connectors.

  • Page 81: Version Display (Version Info)

    Version display (VERSION INFO) This page shows the unit’s SYSTEM version. Touch the bottom center of the screen to show the version of the internal device data and the version of any TASCAM RC-HS32PD remote controller (sold separately) connected to the unit.

  • Page 82: Folder Structure

    You can check the CF card folder and file structure by accessing it from a computer using a card reader, for example. Be aware, however, if you change or erase files inside a project, or change any names, the HS-4000 might not be able to play that project. TASCAM HS-4000 ROOT ├─...

  • Page 83: File Names

    [ Take name first half]-[letter][take number]_[track number].wav S u b F o l d e r , files are S e s s i o n R o o t , files , subfolders are 10 – Internal settings TASCAM HS-4000...

  • Page 84: 11 - Mark And Locate Functions

    ・ If a mark is triggered using parallel control, a mark is added in the same manner as if the MARK key had been pushed. TASCAM HS-4000 Using keys to locate to marks While pressing and holding the SHIFT key. press the .[MARK.] or / [MARK/] key while pressing...

  • Page 85: Locating To Marks

    T I M E O V E R Erasing marks using the mark list information screen M A R K screen. screen, you can select the mark or type of D E L E T E button to erase all the TASCAM HS-4000...

  • Page 86: Editing Mark Positions

    ・ This can also be edited using an externally connected keyboard. ・ Press the keyboard’s Enter key to confirm a setting and its ESC key to clear all the values. TASCAM HS-4000 Editing mark names 1. Select the mark that you want to edit on the screen.

  • Page 87: Manual Locate Function

    ・ This can also be input using an externally connected keyboard. ・ Press the keyboard’s Enter key to confirm a setting and its ESC key to clear all the values. 11 – Mark and locate functions area and use TASCAM HS-4000...

  • Page 88: 12 - Other Functions

    ・ When a region (take) is divided or the recording region (take) reaches the maximum size, the confidence monitoring playback sound will be interrupted for a few seconds. TASCAM HS-4000 R E C S E T U P button to enable...

  • Page 89: Online Functions

    ONLINE key In dual mode, only online playback mode for the selected player can be turned ON/OFF on screen. When using a TASCAM RC–HS32PD remote controller (sold separately), however, regardless of which player is selected, you can press the player A or B ONLINE key to turn online playback mode ON/OFF for the orresponding player.

  • Page 90: Flash Start Function

    12 or 16 buttons each when using the TASCAM RC–HS32PD remote controller (sold separately) in dual playlist mode.

  • Page 91: Operation Using A Computer Keyboard

    FLASH 6 CTRL + F7 key FLASH 7 CTRL + F8 key FLASH 8 CTRL + F9 key FLASH 9 CTRL + F10 key FLASH 10 CTRL + F11 key FLASH 11 CTRL + F12 key FLASH 12 TASCAM HS-4000...

  • Page 92: 13 - Time Code Synchronization

    Playlist mode In playlist mode, recording is not possible regardless of timecode synchronization status. TASCAM HS-4000 Basic operation 1. In timeline or take mode, load the session that you want to record in or play back. In playlist mode, load the session that you want to play back.

  • Page 93: 14 - Importing Files Recorded By Other Devices

    14 – Importing files recorded by other devices This unit can import and play BWF format files recorded by other devices. In addition, files created by other TASCAM HS series units can be played back without rebuilding if they meet the following conditions.

  • Page 94: 15 - Troubleshooting

    (level knob settings) are not all the way down. ● When using a TASCAM RC-HS32PD remote controller (sold separately), confirm that the fader is not lowered. ● If you cannot hear the input signal, arm the recording and turn input monitoring ON.

  • Page 95: 16 - Messages

    The following is a list of messages that the HS-4000 shows in pop-up windows. Refer to this list to learn more about each message as ell as how to respond to them. Message --- error --- An error occurred while writing information.
  • Page 96 CFn has no projects. The CF card does not have even one project. Please create a project. TASCAM HS-4000 Details and responses Editing is possible even when time data is the same at the frame level if the value differs at the subframe level, which is not visible on the screen.
  • Page 97 = name of first session to be created llllllll = the playlist name created "pppppppp" ＝ PPL file name llllllll = the playlist name created aaaaaaaa = the AES31 editing information file name created 16 – Messages Remarks TASCAM HS-4000...
  • Page 98 The file is loading. Load selected project? Confirm that you want to load the selected project. “pppppppp” TASCAM HS-4000 Details and responses "aaaaaaaa" ＝ AES31 file name N = number of marks of selected mark type N = number of marks...
  • Page 99 This message appears when making a session or recording results in a file path name of more than 255 characters. This can occur if you give projects and sessions long names using a computer. 16 – Messages Remarks TASCAM HS-4000...
  • Page 100 Confirm that you want to rebuild the current session. Rebuild failed Rebuilding failed. Rebuild selected project? Confirm that you want to rebuild the selected project. TASCAM HS-4000 Details and responses pppppppp = playlist name n = 1 or 2 n = 1 or 2...
  • Page 101 Playlist* = Playlist, Playlist A or Playlist B llllllll = playlist name ssssssss = session name ssssssss = session name n: number of takes f: sampling frequency u: space used t: total time of all takes 16 – Messages Remarks TASCAM HS-4000...
  • Page 102 Writing System File… Recording information is being written when recording has stopped. TASCAM HS-4000 Details and responses nnnnnnnn = name of project, session or take tttttttt = take name date: year/month/day hour: minutes...

  • Page 103: 17 - Specifications

    +24dBu (12.3Vrms) (D.Ref: -20dBFS, A.Output: +4dBu) D.Ref: Digital Ref. Level A.Output: Analog Output Ref. Lvl PHONES jack Connector: standard 6.3-mm (1/4”) stereo jack Maximum output level: 45 mW + 45 mW or more (THD+N 0.1% or less, into 32 Ω) TASCAM HS-4000...

  • Page 104: Digital Audio Inputs And Outputs

    Signal voltage amplitude: 1 Vp–p (VIDEO IN) Input impedance: 75 Ω ±10% Allowable frequency deviation of external synchronization: ±100 ppm TASCAM HS-4000 Includes switch for enabling termination Input frequency (WORD): 44.1/47.952/48/48.048/88.2/96 kHz Input signal (VIDEO): 24/25/29.97/30 Frame (NTSC/PAL Black burst, HDTV Tri–Level)

  • Page 105: Other Specifications

    Other specifications Power AC 100-240 V, 50–60 Hz Power consumption 25 W External dimensions (W x H x D) 482.6 x 94 x 317.1 mm Weight 5.1 kg Operating temperature range 5–35º C 17 – Specifications TASCAM HS-4000...

  • Page 106: Dimensional Drawings

    17 – Specifications Dimensional drawings TASCAM HS-4000...

  • Page 107: Block Diagram

    17 – Specifications Block diagram TASCAM HS-4000...
  • Page 108 Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán, CP 04100, México DF, México TEAC UK LIMITED Phone: +44-8451-302511 Suites 19 & 20, Building 6, Croxley Green Business Park, Hatters Lane, Watford, Hertfordshire, WD18 8TE, UK TEAC EUROPE GmbH Phone: +49-611-71580 Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany HS-4000 http://tascam.jp/ http://tascam.com/ http://tascam.com/ http://www.teacmexico.net/ http://www.tascam.co.uk http://www.tascam.de/...

Table of Contents