Turning The Power On And Off; Setting The Time Of The Built-In Clock - Tascam HS-4000 Owner's Manual

Turning the power ON and OFF

Open the front panel POWER switch cover and press the POWER
switch.
Startup screen
Home Screen
To turn the power OFF, push the POWER switch on the front
panel again.
CAUTION
Never turn the power OFF during recording, playback, or any other operation
that accesses the CF card. Doing so could, for example, cause recording errors,
loss of recorded data, and sudden loud noises to be output through
monitoring equipment, which could result in damaged equipment and
hearing loss.

Setting the time of the built-in clock

1. Press the MENU key on the front panel to open the
M E N U screen.
2. Touch the
S Y S T E M S E T U P
S E T U P screen.
3. Touch the
C L O C K A D J U S T
you can set the built-in clock.
4. Touch the item that you want to change, and use the
DATA dial on the front panel to change the value.
5. Touch the
S E T button or push the DATA dial to
confirm the setting.
NOTE
After purchasing this unit, set the clock before making your first recording. If
you do not set the clock, the time stamps on recording files will not be correct.
TASCAM HS-4000
3 – Preparation
button to open the S Y S T E M
tab to open the page where
23