Redefining The End Point; Clearing The Virtual Toc - Tascam CD-RW402 Owner's Manual

4 – Playback operations—TOC Editing (drive 1 only)

Redefining the end point

It may be useful to end the playback of a track at a
different point from the one marked by the track
boundary (avoiding a messy ending, or sound
recorded after the end of the take, etc.).
1 Set the point at which the new start point is
to occur. You may find that the jog function is
useful here ("Using the jog function" on
page 23).

Clearing the virtual TOC

If you want to restore the original TOC, and clear all
the edits, you can always eject the disc or turn the
power off, or you can follow the procedure below:
1 With the drive stopped (not in ready mode),
press the MENU key and turn the
until the display shows
.
MULTI DIAL
2 Turn the
MULTI DIAL
. Push the
ALL CANCEL ?
MULTI DIAL
. Push the
TOC EDIT ?
until the display shows
.
MULTI DIAL
2 Press the key and turn the
MENU
until the display shows
.
MULTI DIAL
3 Turn the
MULTI DIAL
. Push the
End Pt SET?
The display now shows
4
Push the
MULTI DIAL
the current track at the playback position
point.
The display now shows
3 Push the
MULTI DIAL
goes out, and the original TOC values (total
running time and number of tracks) are dis-
played.
NOTE
If no edits have been made to the TOC, the
menu does not appear in step 1 with the drive stopped.
It will appear in ready or play mode, allowing you to
perform a TOC editing operation.
TASCAM CD-RW402 Owner's Manual
MULTI DIAL
. Push the
TOC EDIT ?
until the display shows
.
MULTI DIAL
.
Pt SET OK ?
to set the end point of
.
CANCEL OK ?
. The flashing
NO TOC
TOC EDIT
29