Tascam HS-4000 Owner's Manual page 96

16 – Messages
Message
Cannot create new mark point...
Mark point already exists
at the same timestamp.
Cannot create new project.
Media Full.
Cannot execute bounce
Media Full.
Cannot execute bounce
Bounce file size is over 2GB.
Cannot edit this mark point.
Mark point already exists
at the same timestamp.
Cannot increment Take.
Interval is too short.
Or
Media almost full
Cannot increment Take.
System limit reached,
Please make new session.
Cannot load to [AorB].
"llllllll"
is already loaded to [BorA].
Cannot make more than
1000 sessions.
Cannot make new Session.
Media Full.
Cannot RECORD.
(Internal state error)
Cannot RECORD.
ABS time is over 24h
Cannot RECORD.
Media Full.
Cannot RECORD
Play Fs setting is not OFF
Please change Play Fs to OFF
Cannot RECORD
System limit reached.
Please make new Session.
Cannot RECORD.
Take limit reached.
Please change to another Session
Cannot Retake.
No Recent REC history.
Cannot set Mark point.
Mark limit reached.
Cannot turn Fs convert On.
CHn–n D–In is already
Master Clock.
CFn DEVICE ERROR
CFn Format failed
CFn has no projects.
Please create a project.
96
TASCAM HS-4000
Details and responses
You tried to create a mark at a time where a mark
already exists. You cannot create a mark at the same
time as another mark.
The CF card does not have enough space, so you
cannot create a new project.
The CF card does not have enough space, so you
cannot bounce.
The resulting file size after the bounce would
exceed 2 GB, so bouncing is not possible.
Since a mark already exists at the same time, the
mark cannot be edited.
The interval was less than 4 seconds or the CF card
does not have enough space, so starting recording
of the next take is not possible.
The total number of items in the folder, including
files and folders/directories, is too large, so starting
recording of the next take is not possible.
The playlist that you tried to load is already loaded
to B or A, so it cannot be loaded to the other player.
Load a different playlist.
The maximum number of sessions has already been
reached, so a new session cannot be created.
The CF card does not have enough space, so you
cannot create a new session.
Something is preventing recording.
The timeline mode's ABS time exceeds 24 hours so
recording cannot be started.
The CF card does not have enough space, so you
cannot start recording.
Recording is not possible because PlayFs is set to
Pull-up or Pull-down. Set PlayFs to Off.
The total number of items in the folder, including
files and folders/directories, is too large, so starting
recording is not possible.
Since the maximum number of recordable takes or
maximum take number has been reached,
recording is not possible. Change the session.
You cannot retake until at least one new recording
has been made in this session.
You cannot create more than 99 marks.
You tried to turn the sampling rate converter on for
the digital input that is already selected as the
master clock.
The CF card cannot be recognized.
An error occurred during formatting, and formatting
could not be completed.
The CF card does not have even one project.
Remarks
Editing is possible even when time data is the
same at the frame level if the value differs at
the subframe level, which is not visible on the
screen.
llllll = name of playlist to be loaded
n–n = 1–2, 3–4, 5–6, 7–8
n = 1 or 2
n = 1 or 2
n = 1 or 2