Formatting A Cf Card - Tascam HS-4000 Owner's Manual

Formatting a CF card

CAUTION
・ Formatting a CF card erases all the data on it.
・ Always format CF cards with this unit before using them in it. If a CF card
that has been formatted by another device or PC is used, operation
might be affected.
7. Press the MENU key on the front panel to open the
M E N U screen.
8. Touch the
C F M A N A G E button to open the
screen.
9. Touch the
Q U I C K button next to the FORMAT item.
The following pop-up message appears.
NOTE
If no CF card is inserted in that slot, the following pop-up message
appears.
10. Click the
O K button in the pop-up window. A
reconfirmation pop-up window appears.
11. Touch the
O K button on the pop-up message. During
formatting, the following pop-up message appears.
When formatting completes, the following pop-up message
appears.
12. Touch the
C R E A T E P R O J E C T
C F M A N A G E
To make a new project, follow the procedures starting with
step 2 in the following "Creating a new project" section.
Creating a project automatically after quick
formatting
If you press the
the Q U I C K button next to the
be created after the CF card is quick-formatted.
When doing this, however, you cannot change the project
settings. The new project will be created with the same settings
as the current project.
1. Press the MENU key on the front panel to open the
screen. Then, touch the
screen to open the
2. Touch the
F O R M A T
appears.
This window shows the project name, session name,
sampling frequency, bit rate, frame type and number of
tracks in the project to be created.
4 – Basic operation
O K button on the pop-up message. The
screen automatically opens.
Q U I C K & C r e a t e P r o j e c t
F O R M A T item, a new project will
C F M A N A G E button on the
C F M A N A G E screen.
粗利
Q u i c k & C r e a t e P r o j e c t button next to the
item. The following pop-up window message
TASCAM HS-4000
button instead of
M E N U
M E N U
27