Creating A New Project; Setting The Master Clock - Tascam HS-4000 Owner's Manual

4 – Basic operation
3. Touch the
O K button in the pop-up window.
Another pop-up window appears to reconfirm.
4. Touch the
O K button in the pop-up window to start
quick formatting.
After quick formatting completes, a new project is created
automatically.
After the project is created, the Home Screen reopens.
NOTE
Touch the button in the pop-up window to cancel formatting and
C A N C E L
r eturn to the C F M A N A G E screen.

Creating a new project

1. Press the PROJECT key on the front panel to open the
P R O J E C T screen.
2. Touch the
C R E A T E P R O J E C T
C R E A T E P R O J E C T screen.
The screen has 3 pages.
C R E A T E P R O J E C T
On the first page, you can set the project name, the name of
the first created session, the sampling frequency, and the
sampling frequency written to BWF chunks.
For details about each item, see "Creating new projects" on
page 34.
Touch the N E X T button to open the next page.
On this page, you can set the frame type and bit length.
Touch the N E X T button again to open the third page where
28
TASCAM HS-4000
Instead of touching the
button on
page) to create a project with the current settings without adjusting them on
the following screens. Touching the
P R O J E C T
either case, continue the procedures from step 4.
3. After you complete making settings touch the
If a project with the same project name already exists, the C R E A T E
P R O J E C T button appears gray and you will not be able to create a new
project. If this happens, change the project name.
4. Check the settings on the confirmation pop-up

Setting the master clock

1. Press the HOME key on the front panel to open the
button to open the
2. Touch the
3. Select the master clock that you want to use from the
you can set the starting time and number of tracks in
timeline mode, for example.
For details about each item, see "Creating new projects" on
page 34.
NOTE
N E X T button, you can touch the
C R E A T E P R O J E C T screen page one (
C R E A T E P R O J E C T
page two ( 2 / 3 at the bottom of the page) has the same effect. In
C R E A T E P R O J E C T button.
NOTE
message that appears. Press the
them and return to the Home Screen.
Home Screen.
S Y N C button to open the
M A S T E R item. (See "Sync and time code settings (SYNC
T/C)" on page 73.)
C R E A T E P R O J E C T
1 / 3 at the bottom of the
button on C R E A T E
O K button to confirm
S Y N C T / C screen.