N ormal Appearance of Operator Interface Panel
1 0 B
D escription
The operator interface panel shows the following under normal conditions.
4 5 B
Note: If the appearance of the operator interface panel is not as
shown above, refer to the information in Chapters 2, 3, and 4 for
instructions on managing the alarm, supervisory, or trouble
condition.
Green power LED is ON – indicating the panel is receiving AC Power.
All other LEDs off.
Alphanumeric display reports that the system is normal, as shown below.
08:23:45
1-4
firealarmresources.com
SYSTEM IS NORMAL
MON 18-SEPT-00
Need help?
Do you have a question about the 4100ES and is the answer not in the manual?