Incoming Acceptance And Product; Identification; Incoming Acceptance; Product Identification - Endress+Hauser Float level gauge LT5 Operating Instructions Manual

Incoming acceptance and product identification
12
4

Incoming acceptance and product

identification

4.1

Incoming acceptance

Upon receipt of the goods, check the following:
• Are the order codes on the delivery note and the product label identical?
• Are the goods undamaged?
• Do the nameplate data match the ordering information on the delivery note?
• If required (see nameplate): Are the Safety Instructions (XA) enclosed?
If one of these conditions is not satisfied, contact your Endress+Hauser Sales Center.
4.2

Product identification

The following options are available for identification of the device:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note
• W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number from
the nameplate; this will display all the information about the device.
4.2.1 Nameplate
/Level gauge LT5
1
Order code
Serial no.
Ext. ord. cd.
レンジ/Range
エンドレスハウザー
Endress+Hauser Yamanashi Co.,Ltd.
 2 LT5 nameplate
1 Serial code (option)
2 Order code
3 Serial number
4 Extended code
5 Measurement range
6 Manufacturing date (year/month)
4.3

Manufacturer contact address

Endress+Hauser Yamanashi Co., Ltd.
406-0846
862-1 Mitsukunugi, Sakaigawa-cho, Fuefuki-shi, Yamanashi
2
3
4
/Date
5
Yamanashi 406-0846
Made in Japan
Float level gauge LT5
6
NP-2700
A0039931
Endress+Hauser