Pre-Wiring; 110 V Ac - 485 - Screen Innovations 485 Installation Instructions Manual

PRE-WIRING - 110v AC - 485
1. Run 3 conductor wire to the left side of screen cassette installation location. To be sure you
have the correct wire you can order 485 wire directly from SI.
2. Terminate the wires with the provided terminal block shown below.
3. Make sure an appropriate junction box or power receptacle is located within 5ft of the
installation location.
Note: If you're using Dry contact/ 12v Trigger or IR with the incl. Fontus, refer to pg.s 30 - 34.
Installer must follow all local electrical codes when connecting 110v AC power.
Certified electrician is required to connect pigtail power.
NEUTRAL 110V AC(WHITE)
HOT 110V AC(BLACK)
GROUND (GREEN)
5