Table of Contents
Advertisement
SETTING THE LOWER LIMIT - IN SOFTWARE CONTROLS
Connection:
Once your motor is powered up click on the Get Single Motor Address button one motor.
Movements Section:
Stop – Stops the motor when it is moving.
Up Limit – Takes the motor to its upper limit.
Down Limit – Takes the motor to its lower limit.
Jog Up (*10ms) – Moves the motor up by 10 milliseconds times the number entered in
the box next to it.
Jog Down (*10ms) – Moves the motor down by 10 milliseconds times the number
entered in the box next to it.
Jog Up (Pulses) – Moves the motor up by the number of pulses specified in the box next
to it
Jog Down (Pulses) – Moves the motor down by the number of pulses specified in the
box next to it
Adjust Limits Section: You will use this section to set a new upper and lower limit, The
motor should already be placed ina limit setting position before you attempt to change
23
Advertisement
Table of Contents
