Table of Contents
Advertisement
TROUBLESHOOTING
It is 100% programmed and tested at the factory. In case of a malfunction please use the
troubleshooting guide table.
Problem Description
Dirt, fingerprints,
marks, etc. on screen
surface.
Indentations appear
on screen surface.
Wrinkles near bottom
of screen.
Vertical wrinkles in
screen
Dimples in screen
Problems related to electrical or motor function may require a qualified service person or electrician. Should you have a problem that is
not addressed here, call: Screen Innovations (512-832-6939.) http://www.screeninnovations.com/category/support/
39
Probably Cause
Improper handling of
screen.
Debris or particles
adhering to screen due to
static cling.
Screen material has
stretched and thus
increased the tension on
the tabs.
Material has shifted at the
weight bar
Debris rolled up in screen
material
Action to Take
Follow clean instructions outlined in the Screen
Care and Cleaning Section.
https://www.screeninnovations.com/category/support/faq/
general/#how-to-clean-your-projection-screen
Check back of screen as well as front of screen for
dust or debris. Wipe the back of the screen with a
clean damp cloth. Also, lightly brush off the front
of the screen.
Follow the adjusting tab tension section
Gently move the material out to each end of the
weight bar until smooth.
Clean material per
instructions.
Advertisement
Table of Contents
