Table of Contents
Advertisement
SETTING THE LOWER LIMIT - PROGRAMMING & TROUBLE-
SHOOTING EXAMPLES
Programming an AC Motor for Basic functions:
1. Connect the USB to RS485 adapter to the computer's USB port.
2. Connect a CAT5 or higher cable to the RS485 adapter and to the Data Pass through
port on the Bus
Power supply, or to a device port on the SDN system.
3. Open Somfy Digital Network™ Motor Configuration Software.
4. Click the dropdown and select the correct COM port and click Connect.
5. If you do not know the motor ID, use the Get Single Motor Address button.
IP1, IP2, & IP3
For a more detailed manual on this software please download the SI WIRED
25
Advertisement
Table of Contents
