INSTALLATION - FLUSH
Mounting Flush Suspended Brackets
Install minimum 3/8'' threaded rod to structural members in the ceiling per the drawing
5b
below.
Parts to be supplied by installer
4" - 12"
(17.8 cm - 5
cm)
Install the suspended ceiling bracket kits onto the case as shown below. Move the brackets to
match the horizontal position of the the threded rods and then lock down will all 4 screws in
each suspended ceiling bracket assembly.
Threaded Rod 3/8'' Minimum
Stuctural Member
4" - 12"
(17.8 cm - 5
Ceiling
Z
Nut
Washer Washer Nut
cm)
FLUSH SUSPENDED
12