Table of Contents
Advertisement
SETTING THE LOWER LIMIT - IN SOFTWARE CONTROLS
• Up (Pulses) – Moves the motor up by the number of pulses specified in the box next to it.
• Up (ms*10) – Moves the motor up by the number of milliseconds specified in the box next to it
times 10.
• Down (Pulses) – Moves the motor down by the number of pulses specified in the box next to it.
• Down (ms*10) – Moves the motor down by the number of milliseconds specified in the box
next to it times 10.
• Reset Motor(s) – Resets all the limits that are set on the motor.
• Reverse Rotation – Sets the motor to run in the reverse direction.
• Standard Rotation – Sets the motor to run in the standard direction.
• Wink Motor – Jogs the motor up and down.
• Set Up @ Current – Sets the upper limit to the current position that the motor is in.
• Set Down @ Current – Sets the down limit to the current position that the motor is in.
• Set Down @ – Sets the down limit at the pulse count entered in the box next to it.
• Up (ms*10) – If the motor has no limits set, this button will allow you to move the motor up by
the number of milliseconds specified in the box next to it, times 10.
• Down (ms*10) – If the motor has no limits set, this button will allow you to move the motor
down by the number of milliseconds specified in the box next to it, times 10.
24
Advertisement
Table of Contents
