CONTROLS - USING 3RD PARTY
via included Fontus Keypad & Contact Closure Application
Fontus Keypad*
1. Connect Fontus Keypad with UTP cable (upto 60') to included RJ45 to Terminal Block
Dongle.
2. Connect RJ45 to Terminal Block Dongle to BCP side of Fontus.
To optional Head End Power Supply
8 - 1
Fontus Keypad
(Back View)
*Keypad may be sold seperately�
3rd Party Control System
GPIO (INPUTS)
Dry Contact (Lower Limit)
Dry Contact (Upper Limit)
Power Supply
Input
Common Ground
Ground -
7 ~ 28v DC +
AC Screen
34