Table of Contents
Advertisement
im Vertrieb von
Confirm Reset Menu
Exit Menu
Default Settings on Power Up
On power up, the RGB 302/304 will default to the last
settings which were current just prior to the power off.
All 25 user-defined memory blocks will be saved if
Memory Cycling had been set On.
Default Settings on System Reset
On system reset, the RGB 302/304 will have the
following default settings:
• Menu language is set to English
• Backlite is set On
• Memory Cycling is set On
• Horizontal Shift is Center
• Vertical Shift is Center
• Level is Center
• Peaking is Minimum
• Sync Output is Automatic
All 25 user-defined memory blocks will be cleared, but
the 15 factory preset memory blocks will be retained.
www.camboard.de
Page 3-11
CAMBOARD Electronics
The Confirm Reset menu actually resets the
RGB 302/304 to its factory settings. Press the
and
keys simultaneously to reset or
press
to return to the default menu
MENU
cycle, or allow the time-out to occur. A reset
message will be displayed if reset was
selected.
By allowing the time-out to occur, you will
return to the default menu cycle.
The Exit Menu menu allows the user to return
to the Image Controls menus by pressing the
key or the user may return to the default
MENU
menu cycle by either pressing
allowing the time-out to occur.
Tel. 07131 911201
ce-info@camboard.de
Extron RGB 302/304 Universal Interface • User's Manual
Fax 07131 911203
Chapter 3 • Front Panel Menus
NEXT
or by
Advertisement
Table of Contents
