Table of Contents
Advertisement
im Vertrieb von
Chapter 3 • Front Panel Menus
While observing the video screen, use the cursor keys
255 incremental steps for this control.
When the adjustment is complete, release the cursor
key and press
or press
menus, or allow the time-out to occur to save any
changes.
Level Control Menu
Peaking Control Menu
www.camboard.de
Page 3-7
CAMBOARD Electronics
and
to adjust the vertical centering. There are
to go to the Level Control menu,
NEXT
to advance to the Sync Controls
MENU
The Level Control menu is similar to the
brightness control on a data monitor. Using
this menu, the user can change the video
level (defaults to "CENTER") using the
cursor key to lower the level or the
raise the level. Pressing the key once
changes the setting by 001. Holding the key
down continuously causes the setting to
change faster. There are 255 incremental
steps for this control.
When the adjustment is complete, release the
cursor key and press
Peaking Control menu, or press
advance to the Sync Controls menus, or allow
the time-out to occur to save any changes.
The Peaking Control menu provides
compensation for losses in signal quality due
to cable capacitance. Use this control to
adjust the sharpness of the picture on the
presentation screen. Use the cursor keys
or
to move the indicator to the left
or right. Observe the results on the monitor/
projection screen while making the
adjustment. There are eight possible Peaking
settings.
When the adjustment is complete, release the
cursor key and press
Image Controls menus, or press
advance to the Sync Controls menus, or allow
the time-out to occur to save any changes.
Tel. 07131 911201
ce-info@camboard.de
Extron RGB 302/304 Universal Interface • User's Manual
Fax 07131 911203
key to
to go to the
NEXT
to
MENU
to return to the
NEXT
to
MENU
Advertisement
Table of Contents
