Extron electronics RGB 302 User Manual page 15

im Vertrieb von
100-240V
50/60 Hz
MBC
POWER
100-240V
50/60 Hz
____ The diagrams above show the front and rear panels of
the RGB 302 (top pair) and RGB 304 (bottom pair).
Easy Setup Procedure
These easy-to-follow steps describe the general setup
of the RGB 302/304. Refer to the example Application
Diagrams at the end of this chapter.
1. Turn the computer and monitor power Off.
2. Disconnect and remove the computer's local monitor
3. Connect BNC output cables from the RGB 302/304
• Red, Green/sync and Blue, for RGB with sync on
Green. (3-cable hookup)
• Red, Green, Blue and H/HV, for RGB with Composite
sync signals. (4-cable hookup)
• Red, Green, Blue, H/HV and V, for RGB with separate
Horizontal and Vertical sync signals. (5-cable hookup)
www.camboard.de
Page 2-1
CAMBOARD Electronics
Chapter 2 • Installing the RGB 302/304
0.5A
OUTPUT
R G B H/HV
AUDIO IN
ANALOG/ECL
INPUT
0.5A
OUTPUT
R G B H/HV
Do not connect the RGB 302/304 power cable yet
(there is no power switch).
video cable from the computer video port.
to the data monitor/projector — all BNC outputs are
RGB analog. The BNC connectors are marked R, B,
G, H/V and V. They may be connected in any of
three ways:
Tel. 07131 911201 ce-info@camboard.de
Extron RGB 302/304 Universal Interface • User's Manual
Fax 07131 911203
MENU NEXT
V
AUDIO
MBC
L R
POWER
OUT IN
RGB 304
MENU NEXT
V
AUDIO
L R
OUT
RGB 302
RS-232
ANALOG/ECL
INPUT
RS-232